Mechanical Electrical Systems Inc.

A.C. and D.C. Drives and Systems

         Your Future In Motion

Fincor 2610

Overview

Fincor 2610 Series drives feature a fully isolated regulator using surface mount technology. It includes additional inputs and outputs with advanced control capabilities.

Key Features

· 1/8 to 5 hp (115 – 230 VAC)

· Fully Isolated Regulator

· Speed or Torque Control

· 0 – 10 VDC or 4 – 20 mA input signal

· PID / Speed Trim Control Input

· Monitoring Output (0 – 10 VDC or 4 – 20 mA)

· Line Start /Auto Restart Enable/Disable

· Dual Field Supply

· DC-Tachometer Input

 

Non-Regenerative Drives

Non-regenerative drives are typically used on applications which primarily motor in one direction and stopping is achieved through friction or infrequent use of a dynamic braking resistor. These drives may provide speed or torque control from a potentiometer or unidirectional (0-10 VDC or 4-20 mA) control signal. Reversing requires a switch or contact closure to initiate the change. Upon the reversing signal, the drive will allow the motor to coast to a stop (or perform a control stop under a decel ramp with control stop option) or utilize a dynamic braking resistor to pull it to a stop before switching the motor leads with a contactor and starting the motor in the opposite direction.
Mechanical Electrical Systems Inc.Control Techniques

To contact us:

8802 Bash St., Suite F

Indianapolis, IN 46256

 

Phone:  317-844-7328

Fax:  317-844-7859

E-Mail:  info@mesindy.com

Mechanical Electrical Systems Inc.