Mechanical Electrical Systems Inc.

A.C. and D.C. Drives and Systems

         Your Future In Motion

Fincor 2330

Overview

Fincor 2330 Series drives features a fully isolated regulator using surface mount technology. It includes an isolated customer run contact, low voltage operator control circuitry, and full wave power conversion.

Key Features

· 1/8 to 3 hp (115-230V)

· Fully Isolated Regulator

· Speed or Torque Control

· 0-10 VDC or 4-20 mA Input Signal

· Fused Input

· Line Start (Auto Restart)

· Dual Field Supply

· Tachometer Input standard

 

Non-Regenerative Drives

Non-regenerative drives are typically used on applications which primarily motor in one direction and stopping is achieved through friction or infrequent use of a dynamic braking resistor. These drives may provide speed or torque control from a potentiometer or unidirectional (0-10 VDC or 4-20 mA) control signal. Reversing requires a switch or contact closure to initiate the change. Upon the reversing signal, the drive will allow the motor to coast to a stop (or perform a control stop under a decel ramp with control stop option) or utilize a dynamic braking resistor to pull it to a stop before switching the motor leads with a contactor and starting the motor in the opposite direction.
Mechanical Electrical Systems Inc.Control Techniques

To contact us:

8802 Bash St., Suite F

Indianapolis, IN 46256

 

Phone:  317-844-7328

Fax:  317-844-7859

E-Mail:  info@mesindy.com

Mechanical Electrical Systems Inc.